FYNE Audio F303 Floor Standing Speaker System
The flagship of the F300 series is an impressive floor standing loudspeaker capable of huge scale dynamics and highly detailed top end articulation. Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion. High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.
Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.
PREMIUM PERFORMANCE. MODEST PRICE.
The price may be entry level but the F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and audiophile performance unrivaled at its price, the line-up provides versatility for music lovers or movie enthusiasts. With a choice of two bookshelf or stand-mount models, two floorstanders, a centre channel and an LCR speaker, there are plenty of options to suit a wide variety of listening environments.
Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging. High quality, precision components are used within the crossover, including a low loss LF laminated core inductor and HF polypropylene capacitor. The gold-plated speaker terminals ensure a clean signal path. The top of the range F303 has bi-wire terminals fitted to further enhance performance.
Constructed with a multifibre paper cone on the bass/midrange unit, the F300 driver is enhanced with their FyneFlute™ technology. Used on the driver’s roll rubber surround, it provides a non-homogeneous interface which very effectively terminates cone energy.
The tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome, producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended response.
The F300 Series is the perfect choice for those looking for premium performance at a modest price.
Ships as a pair.
|System Type||2 way, rear ported|
|Recommended Amplifier Power (Watt RMS)||35 – 150|
|Continuous power handling (Watt RMS)||75|
|Sensitivity (2.83 Volt @ 1m)||91db|
|Nominal Impedance||8 ohm|
|Frequency Response (-6db typical in room)||32hz – 28khz|
|Drive unit complement||2 x 150mm multi-fibre bass / mid. 1 x 25 mm polyester dome tweeter|
|Crossover type||2nd order low pass, 3rd order high pass|
|Dimensions – HxWxD||962 x 190 x 271mm (37.9 x 7.5 x 10.7”)|
|Weight – Each||14.6kg (32.2lb)|
|Available Finishes||Walnut / Black Ash / Light Oak|